THIS PRODUCT WAS DISCONTINUED NOVEMBER 2015
Kit Includes:
• EGT Probe x2
• Dual Channel Digital Pyrometer Gauge
• Adjustable Compression Fitting x2
• Stainless steel weld bung x2
• 10, 20, 50, 75, or 100 feet of Extension Cable + Connectors x2
(Recommended for fuel types: Diesel & Biodiesel)
<------ KIT CONTENTS ------>
EGT Probe
• Probe diameter 3/16 inch (0.187 inch) (4.75 mm)
• Inconel 600 sheath
• Includes 316 SS adjustable compression fitting
• Cable is 6 feet long (2 meters)
• Made in the USA
Digital Pyrometer
• Compact Size ~ 2-1/16" (52 mm) Round Gauge
• Recall Max temperature "Peak hold" capability
• Dual High temperature set-point alarms with internal relay contact & audible buzzer
• Dual 0 to 5 VDC Analog retransmission outputs (to Data Logger)
• Front Bezel Rating: IP51
• Power: 10 to 26 VDC
Also Includes:
- Audible Buzzer Alarm (internal to gauge)
- Stainless Steel Weld Bung Adapters
- 10, 20, 50, 75, or 100 feet of FEP insulated coated Extension Wire
- Male & Female wire connectors
All products listed in this “Sale Items” section are overstock, legacy, or discontinued items. Items are in new condition with minimum quantities available. All close-out products are priced for a quick sale and are non-refundable and non-returnable.
| 2-Channel Dual Digital EGT + EGT Pyrometer Gauge Specifications: |
| Input: Type K thermocouple |
| Number of Inputs: 2 |
| Display Range: (200 to 1200°F) or (700 to 1800°F) or (150 to 700°C) or (350 to 900°C) |
| Accuracy: +/-0.2% of reading (+/- 1°C) |
| LCD Pointer Resolution: >50°F (25°C) |
| LCD Display update rate: 320 mS (3.12 Hz) |
| Microprocessor Sampling Rate: >3.12 samples/second |
| Environment: 95% Max. RH (non-condensing) |
| Operating Temperature: -5 to +175°F (-20 to +80°C) |
| Front Bezel Rating: IP51 |
| Power: 10 to 26 VDC |
| Current Draw: < 50 mA @ 12 VDC (at full display brightness setting) |
| Alarm Relay Contact Rating: 200 mA short circuit protected , normally open, switches to ground upon activation |
| Panel Cutout Dimensions: Drill round 2-1/16" (52 mm) hole |
| Analog Retransmission Output: 2.5 mV/°F or 5 mV/°C |
| Analog Output Update Rate: 320 mS (3.12 Hz) |
| EGT-DP series EGT Probe Specifications: |
| • Type K Thermocouple |
| • -148°F to 2372°F range (-100°C to 1300°C) |
| • Special Limits of Error accuracy (+/- 0.4% of reading) |
| • Probe diameter 3/16 inch (0.187 inch) (4.75 mm) |
| • Inconel 600 protective sheathing for longevity at high temperatures |
| • Sheath Wall Thickness 0.023" (.58 mm), MgO insulated |
| • Stainless steel over-braid cable with FEP insulated conductors; 6, 12 or 25 foot |
| • Response time constant: 1200 milliseconds |
| Compression Fitting (included): |
| • 316 Stainless steel |
| • Adjustable |
| • 1/8 NPT male thread |
| Weld Bung Fitting (included): |
| • 316 Stainless steel |
| • Dimensions: 0.55" OD x 0.35" tall (24mm OD x 9 mm tall) |
| • 1/8 NPT female thread |
Shipping Notes
Ships from stock
We Ship World Wide! North America, South America, Europe, Asia, Australia - Just about wherever you are, we'll ship to you.
Questions about what you need? Call us 248-636-1515 for technical support.
Welcome Guest
Call Us 
