|
|||
|
Features:
Specifications:
|
Applications:
|
|
The Diesel Exhaust Gas Temperature Sensor is specifically designed for use in Internal Combustion Engines operating on Diesel, Bio Fuels, LNG Injection Systems or any system using a sulfuric or exhaust systems that are prone to fouling EGT probes. This probe has been designed to withstand the rigors of marine and over the road trucking. It will also withstand the rigors of racing, tuning, and testing applications. Made in the USA from superior materials, designed to withstand highly corrosive saltwater environments and even the most extreme racing conditions. The foul-proof sensing tip is recommended for EGT temperature measurements of sulfuric fuels such as diesel, bio diesel mixtures and LNG injection systems. The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2200 degrees F (1200 degrees C). Making it an excellent choice for exhaust systems requiring a high level of reliability and ruggedness. The EGT probe will fit most diesel engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.187" diameter (4.75 mm) with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8" NPT compression fitting adapter is included. The EGT probe cable lead length is 6 feet (2 meters). The probe cable is over-braided in stainless steel for heavy-duty abrasion resistance. The signal wires are Teflon insulated. Designed to deliver high performance, high temperature measurements, reliably and consistently in the most extreme operating conditions. The high temperature sensors of choice for Mariners, commercial and pleasure craft, professional truck racing teams and R&D test labs. The EGT probes can be used for many different applications, including… but not limited to… Marine, Agricultural, Over The Road Trucking, DHRA, Drag Racing, Diesel Sled Pulling, Tow Vehicles and Engine Management just to name a few. We will build custom probes for you OEM and conversion requirements 10 units to 1000s.
In stock and available for immediate shipment. We ship worldwide. IMPORTANT NOTE: Please confirm with your instrument manufacturer that the instrument is compatible with a Type K thermocouple sensor. Check our Compatibility List Here In stock and available for immediate shipment! We ship worldwide.
|
||

|
|