EGT Exhaust Gas Temperature Sensors for Tuning and Racing From The Sensor Connection

EGT RACING PROBES / SENSORS Fast response

EGT Muffler Clamp Probe .187 Diameter Probe		Designed for EGT applications and headers without a compression fitting. The Muffler Clamp Probe has a 3/16" (4.7mm) diameter and 6 foot (18 cm) cable. The probe has a 90-degree bend accommodating tight locations. Drill hole in header. Insert the probe through the drilled hole and tighten the Muffler Clamp. These can be used for many different applications, including but not limited to [read more]

Exhaust Probe w/ Compression Fitting .187 Diameter Probe		The Exhaust Gas Temperature Sensor is specifically designed for use in racing and testing applications. A common use is motorcycle, snowmobile and automotive racing. It has superior construction and materials. The Probe has a 3/16" (4.7mm) diameter and 6 foot (18 cm) cable. It is capable of withstanding racing conditions. The Exhaust Gas Temperature Probe is capable of surviving vibration and heat up to2200 degrees F (1200 degrees C). The sensor will fit most [read more]
EGT Diesel Probe		The Diesel Exhaust Gas Temperature Sensor is specifically designed for use in diesel engine racing, tuning, and testing applications. Made in the USA from superior materials, designed to withstand even the most extreme racing conditions. The foul-proof sensing tip is recommended for EGT temperature measurements of sulfuric fuel [read more]


SEVERE DUTY EGT PROBES / SENSORS fast response

EGT Individual Probe .250 diameter probe		The Individual EGT Harness Probe is specifically designed for use in extreme automotive racing applications. It has a robust .250 inch diameter and superior construction and materials. The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to2200 degrees F (1200 degrees C). Probe and will fit most internal combustion engine such as single cylinder two or four stroke engines with nominal [read more]

EGTSensor Harness .250 DiameterProbe		EGT Harness Probe Assembly is specifically designed for use in extreme automotive racing applications. It has superior construction and materials. The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to2200 degrees F (1200 degrees C). One EGT assembly is comprised of eight probes and will fit most V8 [read more]